Several of the compound parameter screens include a Peak-Hold function that allows you to keep your eyes on the road.
The Boost screen shows the peak boost in between boost episodes.
This gauge includes an orange shift light that is programmable by gear.
Lambda 1 / AFR 1
Lambda2 / AFR 2
Lambda 3 / AFR 3
Lambda4 / AFR 4
Lambda Target
AFR Target
Manifold Air Pressure (kPa or psi)
Fuel Pressure (kPa or psi)
Oil Pressure (kPa or psi)
Intake Air Temperature (Celsius or Fahrenheit)
Coolant Temperature (Celsius or Fahrenheit)
Engine Speed (RPM)
Ignition Timing
Battery Volts
Throttle percentage
Ethanol Content (%)
Vehicle Speed (KPH or MPH)
Individual Wheel Speed (KPH or MPH)
Calculated Gear
Exhaust Gas Temp 1 & 2 (Celsius or Fahrenheit)
Barometric Pressure (kPa)
Fuel Trims 1 & 2 (long Term and Short Term %)
Turbo Timer (ignition status and time)
Engine Demand (%)
Acceleration / latitude & Longitude (SI or SAE)
Fuel Flow & Return (cc/min or g/h)
Nitrous Pressure 1-4 ( kPa or psi)
Injector 1 Pulse width (ms)
Engine Knock
Injector Duty Cycle (%)
Air Box Temp (Celsius or Fahrenheit)
Oil Temperature (Celsius or Fahrenheit)
Fuel Temperature (Celsius or Fahrenheit)
Transmission Temperature (Celsius or Fahrenheit)
Differential Temperature (Celsius or Fahrenheit)
Turbo Speed (RPM)
Traction Control Slip
Traction Control Differential
BTI CAN Bus gauge for Haltech ECUs with Plug and Play Harness
- Connector Style: 8 Pin Tyco Connector
This Gauge has 12 programmable screens that are capable of displaying more than 40 parameters. Not only do you have the ability to see many parameters on one gauge, but this also means that you don not have to purchase and wire in a bunch of additional sensors.
The Haltech integration is available with two different connectors: 4 pin Deutsch connector (Elite Series) or an 8 pin Tyco connector. You must select the connector for your interface.
BTI CAN Bus gauge for Haltech ECUs with Plug and Play Harness
- Connector Style: 4 Pin Deutsch Connector
This Gauge has 12 programmable screens that are capable of displaying more than 40 parameters. Not only do you have the ability to see many parameters on one gauge, but this also means that you don not have to purchase and wire in a bunch of additional sensors.
The Haltech integration is available with two different connectors: 4 pin Deutsch connector (Elite Series) or an 8 pin Tyco connector. You must select the connector for your interface.
Custom Splash Screen
Note that the images must be converted to a black and white image.
60 mm option
The 60mm gauge has a larger display and retains the exact functionality as the 52mm gauge
BTI 3.5 TFT Gauge with Haltech integration
If you are looking for a little more than just a display, then this may be the device for you. This gauge has the same capabilities as the standard BTI gauges, but adds some features like user scalable analog outputs for Boost control, Traction Control, Map selection, Nitrous Purge, Nitrous Arm, and a timed Line Lock. This eliminates those rotary switches and additional holes in your dash. There are also many peak hold functions including a Boost Episode snap-shot screen that will display key parameter values at peak boost . Finally, this gauge retains the user programmable shift light by gear function.
We have also added some new options for this gauge: Now available with a flat back so that you can use an adhesive strip to mount the display in a suitable location.
There is also the same display with a suction cup windshield mount which allows for the most versatile mount as well as a similar version that comes with a standard mount with a red label adhesive backing.
