LINK / VIPEC
The BTI CAN gauge programmed for Link / Vipec Integration allows for the selection of 12 user programmable screens. Each of the 12 screens can be programmed with a single parameter (listed below) or you may also select compound parameter screens which display multiple parameters in an easy to read fashion.
Several of the compound parameter screens include a Peak-Hold function that allows you to keep your eyes on the road.
The Boost screen shows the peak boost in between boost episodes.
This gauge includes an orange shift light that is programmable by gear.
Note that there are two wiring harnesses available: 1. Plug and play for the round 6 pin Amphenol connector. 2. Plug and pin with pins crimped on for easy termination into the main ECU connector.
Several of the compound parameter screens include a Peak-Hold function that allows you to keep your eyes on the road.
The Boost screen shows the peak boost in between boost episodes.
This gauge includes an orange shift light that is programmable by gear.
Note that there are two wiring harnesses available: 1. Plug and play for the round 6 pin Amphenol connector. 2. Plug and pin with pins crimped on for easy termination into the main ECU connector.
Parameters available on Link and Vipec ECUs
Lambda 1 / AFR 1
Lambda2 / AFR 2
Lambda Target
AFR Target
Manifold Air Pressure (kPa or psi)
Boost Target (kPa or psi)
Fuel Pressure Target (kPa or psi)
Fuel Pressure (kPa or psi)
Oil Pressure (kPa or psi)
Intake Air Temperature (Celsius or Fahrenheit)
Coolant Temperature (Celsius or Fahrenheit)
Charge Air Temperature (Celsius or Fahrenheit)
Engine Speed (RPM)
Ignition Dwell
Battery Volts
Throttle percentage
Ethanol Content (%)
Vehicle Speed (KPH or MPH)
Driven Wheel Speed (KPH or MPH)
Non Driven Wheel Speed (KPH or MPH)
Calculated Gear
Ideal Torque
Engine Knock Cylinders 1-8
Oil Temperature (Celsius or Fahrenheit)
Fuel Temperature (Celsius or Fahrenheit)
ECU Temperature (Celsius or Fahrenheit)
Injector Duty Cycle (%)
Trigger Errors
Anti-Lag
Traction Control Slip
Lambda 1 / AFR 1
Lambda2 / AFR 2
Lambda Target
AFR Target
Manifold Air Pressure (kPa or psi)
Boost Target (kPa or psi)
Fuel Pressure Target (kPa or psi)
Fuel Pressure (kPa or psi)
Oil Pressure (kPa or psi)
Intake Air Temperature (Celsius or Fahrenheit)
Coolant Temperature (Celsius or Fahrenheit)
Charge Air Temperature (Celsius or Fahrenheit)
Engine Speed (RPM)
Ignition Dwell
Battery Volts
Throttle percentage
Ethanol Content (%)
Vehicle Speed (KPH or MPH)
Driven Wheel Speed (KPH or MPH)
Non Driven Wheel Speed (KPH or MPH)
Calculated Gear
Ideal Torque
Engine Knock Cylinders 1-8
Oil Temperature (Celsius or Fahrenheit)
Fuel Temperature (Celsius or Fahrenheit)
ECU Temperature (Celsius or Fahrenheit)
Injector Duty Cycle (%)
Trigger Errors
Anti-Lag
Traction Control Slip
BTI 52mm CAN Bus gauge for Link / Vipec ECUs with Plug and Play or Plug and Pin Harness
- Connector Style: 6 Pin Round Amphenol Connector
BTI 52mm CAN gauge with Link / Vipec plug and play harness
This Gauge has 12 programmable screens that are capable of displaying more than 40 parameters. Not only do you have the ability to see many parameters on one gauge, but this also means that you don not have to purchase and wire in a bunch of additional sensors.
The Link / Vipec integration is available with two different connectors: 6 pin round Ampehenol connector or a terminated Super Seal 1.0 pin for termination directly into the ECU connector.
This Gauge has 12 programmable screens that are capable of displaying more than 40 parameters. Not only do you have the ability to see many parameters on one gauge, but this also means that you don not have to purchase and wire in a bunch of additional sensors.
The Link / Vipec integration is available with two different connectors: 6 pin round Ampehenol connector or a terminated Super Seal 1.0 pin for termination directly into the ECU connector.
BTI 52mm CAN Bus gauge for Link / Vipec ECUs with Plug and Play or Plug and Pin Harness
- Connector Style: Plug and Pin terminated Harness
BTI 52mm CAN gauge with Link / Vipec plug and play harness
This Gauge has 12 programmable screens that are capable of displaying more than 40 parameters. Not only do you have the ability to see many parameters on one gauge, but this also means that you don not have to purchase and wire in a bunch of additional sensors.
The Link / Vipec integration is available with two different connectors: 6 pin round Ampehenol connector or a terminated Super Seal 1.0 pin for termination directly into the ECU connector.
This Gauge has 12 programmable screens that are capable of displaying more than 40 parameters. Not only do you have the ability to see many parameters on one gauge, but this also means that you don not have to purchase and wire in a bunch of additional sensors.
The Link / Vipec integration is available with two different connectors: 6 pin round Ampehenol connector or a terminated Super Seal 1.0 pin for termination directly into the ECU connector.
Below is the required LCS file required for CAN transmission for the Link and Vipec ECUs.
| bti_gauges.lcs |
